Ceiling installation FVP Pulse-D

Year-round heat recovery
High economic efficiency
Lowest power consumption

The award-winning PulseVentilation system for maximum efficiency and planning freedom

The virtually invisible ceiling unit is particularly suitable for floor-to-ceiling glazing and the absence of a raised floor. It can be combined with various ceiling elements (e.g. lights).

Thanks to the PulseVentilation system, all variants of the FVP family are able to simulate organic air movement to allow buildings to breathe “naturally” through just one façade opening. The very high heat and cold recovery, which can be used all year round, guarantees energy efficiency that is unique in the industry. The transient flow with mixed displacement ventilation results in very high thermal comfort even at low supply air temperatures.

  • Decentralized heating, cooling, dehumidification and filtration with pulsating ventilation through just one façade opening
  • Highly economical thanks to highly efficient heat recovery (heat recovery efficiency up to 90 %) and demand-oriented control concepts
  • Draught-free and low-noise impulse flow up to 130m3/h(260m3/h in hybrid ventilation mode) with optimum ventilation efficiency
  • Large gain in usable space due to elimination of central air conditioning unit, shafts, duct system and fire dampers
  • Lowest power consumption due to minimized pressure losses, corresponds to 10 % of the SFP specification of the EnEV (approx. 20 W per device)
  • Year-round heat recovery reduces the investment costs for the central heat supply

An overview of all variants in the FVP family including technical data can be found in our brochure Decentralized ventilation units.

LTG Connected Intelligence

Demand-based, room-specific ventilation and air conditioning with and without a higher-level building management system. With decentralized control intelligence. Efficient, scalable, bus-compatible.

Corona virus
Here we have compiled the most important facts and information on the operation of ventilation systems. Recommendations for operating the FVPpulse decentralized ventilation units can be found here.

Ready for a breath of fresh air? Contact our comfort air experts now and breathe a sigh of relief - in the truest sense of the word!

Technical data

Technical Data for L_pa= 35 dB(A)

Max. Cooling Output Total: 830 W Room: 590 W 1) Max. Heating Output Total: 2105 W Room: 745 W 2) Volume flow up to 130 m³/h on average over the entire cycle Volume flow up to 260 m³/h in hybrid ventilation mode Heat recovery coefficient >80 % Electrical power consumption 12-40 W 3) Schalldruckpegel Lp(A) 21-37 dB (A)

Dimensions (Length x Width x Height in mm)

1204 x 1018 x 266

DWG Downloads


Operating instructions Decentralized ventilation unit FVPpulse-D German
PDF 7.62 MB
LTG recommendations Decentral / FVPpulse & Corona
PDF 108 kB
Overview brochure decentralized ventilation units German
PDF 10.11 MB
Brief information Decentralized ventilation unit FVPpulse-D German
PDF 1.63 MB
Technical brochure Decentralized ventilation unit FVPpulse-D Ceiling installation
PDF 2.9 MB
Specification text Decentralized ventilation unit FVPpulse-D
DOC 58.19 kB
Presentation of decentralized ventilation units FVP pulse
PDF 2.4 MB
Decentralized ventilation unit design tool FVPpulse German
FILE 3.91 MB
Technical article Decentralized ventilation unit FVPpulse German
PDF 86.94 kB
Technical article Instationary ventilation technology Facade ventilation unit FVPpulse German
PDF 1.66 MB